Brew-Clean - 45 lb. Bucket
BREW CLEAN NON-CAUSTIC BREWERY CLEANER
DESCRIPTION
BREW-CLEAN is a non-caustic, alkaline cleaner, designed for use in all CIP/COP cleaning operations
found in the brewery. BREW-CLEAN is formulated with sodium silicate, low/controlled foam
surfactants, buffering compounds, water conditioning agents and a synergistic oxidizing agent.
• Non-caustic – Safe on soft metals, enhanced personal safety
• Low-foaming – Ideal for CIP
• Economical – full strength powder
• Concentrated blend of surfactants – effectively penetrates soils and deposits
• Effective in hard water conditions - free rinsing, leaves no residue
DIRECTIONS
• Use 1/2 to 3 ounces of BREW-CLEAN per gallon of water. Recirculate for 20 to 40 minutes. Clean
vessels at 140° F. Clean line circuits at 160° F. Rinse thoroughly with fresh water.
• For specific use recommendations or answers to any cleaning or sanitation questions you may
have, contact us at (800) 248-8515, or send us an email at [email protected].
PROPERTIES
Form ………………………………………………………………………...……… powder
Color ………………………………………………………………………...……… white
Odor ………………………………………………………………………………… slight
pH of a 1% solution …………………………………………………………..…… 12
Foaming ……………………………………………………………………………. low
Special considerations and notes: safe on most soft metals when used recommended. Test use solution on
an inconspicuous area or a piece of similar metal before using on soft metals. Contains sodium metasilicate. Sodium
metasilicate can etch glass if not thoroughly rinsed and allowed to dry on glass surfaces.