Italian-Made Brewery Hose. Cut in Fort Worth.
Why Brewers Buy Alfagomma from Pro Brew Supply
Crush-resistant T410 Helix for floor duty, extra-flexible The BREWT for tight cellar runs — both on the same FDA and 3-A compliant chlorobutyl tube.
Both Alfagomma lines sell by the foot from our Texas warehouse, with crimped sanitary tri-clamp ends available on any length we cut.
Our team helps commercial brewers source ingredients and equipment, solve problems, and keep production moving. We are here to make buying hose easier, not more complicated.
Which Alfagomma Hose?
T410 Helix vs. The BREWT
Same sanitary tube, two different jobs. The T410’s embedded PET helix takes forklift traffic and floor abuse; The BREWT gives up pressure headroom for weight and flexibility in tight cellar runs. Both sell by the foot with crimped sanitary tri-clamp ends available.
| Spec | T410 Helix Crush Resistant | The BREWT T422LH Extra Flexible |
|---|---|---|
| Working pressure | 240 psi constant (16 bar) | 150 psi (10 bar) |
| Weight (1.5") | 1.00 lbs/ft | 0.93 lbs/ft — up to 25% lighter than similar rubber hose |
| Min. bend radius (1.5") | 5 in | 3 in |
| Reinforcement | High-tensile textile cords, embedded PET helix | High-tensile textile cords, embedded helix wires |
| Cover | Gray EPDM — abrasion & ozone resistant | Red smooth NR/EPDM — easy cleaning, smooth clamping surface |
| Service temp | −22 °F to 226 °F (both) | |
| Diameters | 1" · 1.5" | 1" · 1.5" |
Specs from Alfagomma published data for the 1.5" builds; confirm exact values for your diameter on the product page. Sold by the foot — enter your length as quantity.
Alfagomma Brewery Hose
View All Alfagomma Products →Pick the build, then pick the diameter.
The T410 Helix takes floor traffic and carries 240 psi; The BREWT trades pressure headroom for weight and flexibility in tight cellar runs. Both share the same sanitary chlorobutyl tube, sell by the foot, and take crimped sanitary tri-clamp ends.
Explore IREKS Categories
Build your malt bill with intention.
Every IREKS category plays a different role in the brewhouse. Base malts provide the foundation. Vienna and Munich malts add bread, toast, and depth. Wheat and rye support foam, body, and mouthfeel. Crystal, roasted, and specialty malts help dial in color, sweetness, complexity, and finish.
Shop the full brewery hose lineup — every build and diameter we stock.
Shop Brewery Hose → Hose, Fittings & ClampsBrowse 150+ fittings and clamps to complete your transfer setup.
Browse Fittings → Tri Clamp AdaptersComplete the connection with sanitary tri-clamp adapters.
Shop Tri Clamp →Alfagomma Buying Guide and FAQs
What is the relationship between Alfagomma and Kuriyama?
Alfagomma S.p.A. is the Italian manufacturer of these hoses. Kuriyama of America is the exclusive distributor of Alfagomma industrial rubber hose in the United States and Mexico — which is why the same hose often carries both names. Pro Brew Supply sources through that channel and stocks the brewery lines in Fort Worth.
Should I choose the T410 Helix or The BREWT?
Choose the T410 Helix where the hose lives on the floor and takes traffic — its embedded helix is crush resistant and it carries 240 psi constant working pressure. Choose The BREWT where flexibility and weight matter most: tight bends around tanks, frequent moves, overhead runs.
Can Alfagomma hose handle spirits?
Yes — both lines are rated for liquid food and alcoholic beverages up to 190 proof or 95% alcohol content.
How do I clean and sterilize Alfagomma brewery hose?
The chlorobutyl tube allows sterilization with 266 °F steam for 30 minutes or with a 5% soda solution, and handles 226 °F on a continuous basis.
How do I order Alfagomma hose by the foot?
Enter the length you need as the quantity on the product page. Crimped sanitary tri-clamp ends are available on any length we cut.
Building Your Transfer Setup?
Hose, fittings, clamps, and adapters — send us the job and we’ll spec the run end to end, or start with the Hose Selection Guide.